Identifikasi dan Analisis Risiko Bahaya pada Proses Pembuatan Produk Gerabah Menggunakan HIRADC (Studi Kasus: UD. Putra Pendowo Kota Malang)

Faradilla Indah Oktavia Sari, Anggi Renawati, Azmi Burhan Fadholi, Firnadila Prawidiastri, Lotu Mountaz, Nadila Ayu Setya Pramesti

Abstract


In pottery production centers, all activities involve risks that must be controlled to avoid losses. As for the pottery production houses which are included in the small industry, there is no maximum risk recognition and control for the workers and the company. Therefore, it is necessary to identify risks that may occur and determine controls so that risks can be minimized. The research was conducted at a pottery production house called UD Putra Pendowo with 10 workers. This research aims to identify risks at UD Putra Pendowo and formulate controls for the risks found. The method used in this research is descriptive observational with a cross sectional design which is carried out by making direct observations, while the hazard analysis method uses the HIRADC (Hazard Identification Risk Assessment and Determinant Control) method. From the research that has been carried out, there are 30 risks with Level 6 low risk, 16 medium risk and 8 high risk. It can be concluded that it is necessary to carry out controls to reduce risks in work at UD Putra Pendowo. Risk control that can be carried out is engineering by making tool covers that are prone to injuring hands, creating storage areas for certain equipment, and using tools such as trolleys; administration in the form of creating SOPs, safety signs, and education for workers; the provision and use of personal protective equipment.

Full Text:

PDF

References


Almanan, O. R., & Nisa Ulinuha, F. (2023). Kajian Ergonomi Sikap Kerja Pengrajin Gerabah di Sentra Gerabah, Klipoh, Borobudur. Borobudur Engineering Review, 3(1), 39–52. https://doi.org/10.31603/benr.9087

Aprilla, B. F., & Yulhendra, D. (2023). Penerapan Metode HIRARC dalam Menganalisis Risiko Bahaya dan Upaya Pengendalian Kecelakaan Kerja di Area Crusher dan Belt Conveyor PT. Semen Padang. Jurnal Bina Tambang, 8(1).

Hayati, D. (2020). Identifikasi risiko Bahaya Di Pergudangan Dengan Menggunakan Hiradc Hazard Identification Risk in Warehouse Using Hiradc. Seminar Nasional Manajemen Industri Dan Rantai Pasok, 1, 80–84.

Hazards in the Food Processing Industry | Graphic Products [Internet]. [cited 2023 Apr 3]. Available from: https://www.graphicproducts.com/articles/hazards-in-the-food-processing-industry/

Pandya, M., & Desai, D. (2019). Systematic review on various risk assessment techniques of musculoskeletal disorder. Industrial Engineering Journal, 12(6), 102865.

Peraturan Menteri Ketenagakerjaan Republik Indonesia Nomor 5 Tahun 2018. (2018). Tentang Keselamatan Dan Kesehatan Kerja Lingkungan Kerja. Peraturan Menteri Ketenagakerjaan Republik Indonesia No. 5 Tahun 2018, 5, 11.

Saidah, T. (2023). Hazard Identification Risk Assessment and Determining Control. 1(2).

Sulistyorini, A., Rahfiludin, M. Z., & Suroto, S. (2019). Determinan Perilaku Keselamatan Kerja: Peran Faktor Personal Penjamah Makanan di Warung Lesehan Malioboro. JST (Jurnal Sains Terapan), 5(2). https://doi.org/10.32487/jst.v5i2.677

Ulfah, M. (2020). Identifikasi Dan Pengelolaan Risiko Rantai Pasok Sentra Produksi Kerajinan Gerabah Desa Bumijaya Dengan Metode House of Risk. Journal Industrial Servicess, 5(2), 188–193. https://doi.org/10.36055/jiss.v5i2.7998


Refbacks

  • There are currently no refbacks.